[Dec 30, 2023] E_S4HCON2022 certification guide Q&A from Training Expert PassLeader
E_S4HCON2022 Certification Overview Latest E_S4HCON2022 PDF Dumps
NEW QUESTION # 33
Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:
- A. Using the database migration option (DMO) for SUM
- B. Using the main configuration option "Single System" when installing an Add-On
- C. Using the main configuration option "Standard" when applying SAP Support Packages
- D. Using the main configuration option "Single System" in case of an upgrade.
Answer: B
NEW QUESTION # 34
Which maintenance events are possible with SUM for an SAP system based on AS ABAP 7.40 and above? There are 3 correct answers to this question.
- A. Dual Stack split
- B. Release upgrade
- C. Database migration
- D. Homogenous system copy
- E. Support Package Stack update
Answer: B,C,E
NEW QUESTION # 35
Which of the following SUM activities require a stack XML file calculated by the maintenance planner? Note: There are 3 correct answers to this question.
- A. Prerequisite check
- B. DMO without system update
- C. SAP S/4HANA conversion including DMO
- D. Benchmark tool
- E. SAP S/4HANA conversion without DMO
Answer: A,C,E
NEW QUESTION # 36
Which are valid options to check the progress of the database migration in a Microsoft Windows environment?
There is correct answers to this question.
Response:
- A. Check logs for jobs starting with "RSUPG_SGEN" in the system
- B. Check the "Charts Control Center" in the SUM UI
- C. Check the log files written under "SUM\abap\log"
- D. Check the dump size of the database export on disk
Answer: B,C
NEW QUESTION # 37
In which scenarios do you need to use SUM 2.0 instead of SUM 1.0?
There are 2 correct answers to this question.
Response:
- A. Upgrading to SAP ECC 6.08 without using DMO
- B. Using DMO when applying Support Packages to SAP ECC 6.07
- C. SAP S/4HANA conversion to SAP S/4HANA 1709
- D. Updating to SAP ECC 6.07 using DMO
Answer: A,C
NEW QUESTION # 38
During an SAP S/4HANA conversion with DMO, which of the following actions take place during the business downtime of the SUM procedure?
There are 3 correct answers to this question.
Response:
- A. Execution of SPDD modification adjustment
- B. Execution of XPRAs and AIMs
- C. Execution of SPAU modification adjustment
- D. Creation of the table structures in the new SAP HANA database
- E. Execution of eCATTs for business validation tests
Answer: B,C,E
NEW QUESTION # 39
During the configuration of the DMO for SUM, how does the tool behave if option "Do not compare table contents" is selected regarding table comparison?
Please choose the correct answer.
Response:
- A. It performs a comparison of all tables using check sum.
- B. It performs a comparison on all tables using row counts.
- C. It does NOT perform any table comparison.
- D. It performs a comparison on selected tables using check sum.
Answer: B
NEW QUESTION # 40
You are performing an SAP S/4HANA conversion with DMO as an inplace migration. How does SUM transfer the data by default from the source database to the target database during the migration?
- A. Using R3load and file transfer
- B. Using R3load and memory pipes
- C. Using work processes and network socket connection
- D. Using R3load and network socket connection
Answer: B
NEW QUESTION # 41
Which step can be optimized when you provide the MIGRATE_DT_DUR.XML file to SUM?
- A. Downtime migration
- B. Silent data migration (SDM)
- C. Shadow on target creation
- D. Downtime conversion
Answer: A
NEW QUESTION # 42
In which case can you use near-Zero Downtime Maintenance (nZDM)? Note: There are 2 correct answers to this question.
- A. When performing an SAP S/4HANA conversion with DMO
- B. When performing an SAP S/4HANA conversion without u DMO
- C. When upgrading an SAP S/4HANA Server system
- D. When upgrading an SAP ECC system with DMO
Answer: C,D
NEW QUESTION # 43
You are performing an SAP S/4HANA conversion with the migration repetition option. After which phase does SUM stop to enable a test cycle?
- A. EU_CLONE_MIG_SOT_RUN
- B. EU_CLONE_MIG_DT_CREATE
- C. EU_CLONE_MIG_DT_RUN
- D. EU_IMPORT_ALL
Answer: C
NEW QUESTION # 44
You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:
- A. ATC (ABAP Test Cockpit)
- B. SYCM (Simplification Database Content)
- C. SE80 (Object Navigator)
- D. SAT (Runtime Analysis)
Answer: A,C
NEW QUESTION # 45
During a SUM run you want to check if the phase SHADOW_IMPORT_INC is still running properly. Where can you find information about this?
There are 2 correct answers to this question.
Response:
- A. Check for running R3trans processes on the host of the primary application server
- B. Check for running batch jobs in the shadow system via Job Overview (SM37)
- C. Check for running R31oad processes on the host of the primary application server
- D. Check for the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
Answer: A,D
NEW QUESTION # 46
The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
There are 2 correct answers to this question.
Response:
- A. Check the most recent entries in SAPup.log
- B. Check the system log (transaction SM21) of the SAP system
- C. Check the messages shown by the SUM UI
- D. Check the most recent entries shown in file sapevt.trc
Answer: A,C
NEW QUESTION # 47
Which Guides contain information about SUM phases starting with "EU_CLONE_"?
There are 2 correct answers to this question.
Response:
- A. The SAP S/HANA Conversion Guide
- B. The major SUM Guide
- C. The DMO Guide
- D. The Application Guide
Answer: A,C
NEW QUESTION # 48
In ICNV. How database operations synchronized between the source and the target table?
- A. Deletes are directly executed in the target table by delete trigger.
- B. AA
Answer: A
NEW QUESTION # 49
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:
- A. By searching for transport requests in DIR_TRANS, subdirectory "transport"
- B. By searching for transport requests in the file umodauto.Ist
- C. By searching for transport requests named <SID>K0<number>
- D. By searching for transport requests that are assigned to the project SAP_ADJUST
Answer: B
NEW QUESTION # 50
What can you achieve by setting the SUM parameter "migration_only" to 1 in parameter file SAPup_add.par?
Please choose the correct answer.
Response:
- A. An SAP S/4HANA conversion is performed, without adapting the customer data.
- B. An upgrade of the software components is performed, without changing the database type.
- C. A migration of the SAP system to a new hardware is performed, without performing an SAP S/4HANA conversion.
- D. A change of the database type is performed, without changing the software components.
Answer: D
NEW QUESTION # 51
What do you need to consider when performing the SI checks for an SAP S'4I 1ANA conversion? Note There are 2 correct answers to this question.
- A. The errors from the SI checks must be solved, otherwise. SUM will report an error
- B. The SI checks are executed in the development system and the results are transported into the subsequent systems
- C. You need to build up an SI check framework by applying SAP Notes
- D. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework
Answer: C,D
NEW QUESTION # 52
What do you need to know about the SAP ERP Upgrade and Update Guide?
There are 2 correct answers to this question.
Response:
- A. It contains a troubleshooting section
- B. It contains a section "free space requirements"
- C. It is a database-specific document
- D. It is target release specific
Answer: B,D
NEW QUESTION # 53
Which steps can SUM perform during an SAP S/4HANA conversion? Note; There are 2 correct answers to this question.
- A. Software update
- B. Database migration
- C. Custom code analysis
- D. Unicode conversion
Answer: A,B
NEW QUESTION # 54
What is the minimum SAP_BASIS release of an SAP ECC system that can be converted to an SAP S/4HANA Server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 55
What is the different between the benchmaking and the repetition option of the Database Migration Option (DMO) of SUM?
- A. The repetition option allows you to repeat the complete migration
- B. The benchmaking option allows you to repeat the uptime migration
- C. The repetition option allows you to run the migration without a shadow system
- D. The benchmaking option allows you to migration a specified set of tables
Answer: D
NEW QUESTION # 56
ICNV initialization does 3
- A. Build index on flag column
- B. Creation of views
- C. Creation of flag
- D. AA
Answer: A,B,C
NEW QUESTION # 57
What is the main purpose of performing benchmark runs for an SAP S/4HANA conversion?
- A. To optimize the migration
- B. To optimize the main import
- C. To optimize the activation
- D. To optimize the conversion
Answer: A
NEW QUESTION # 58
......
The Best SAP E_S4HCON2022 Study Guides and Dumps of 2023: https://certkiller.passleader.top/SAP/E_S4HCON2022-exam-braindumps.html