[Feb-2022] Feel Fortinet NSE5_FAZ-6.2 Dumps PDF Will likely be The best Option
NSE5_FAZ-6.2 exam torrent Fortinet study guide
Introduction to Fortinet NSE 5 - FortiAnalyzer (NSE5 FAZ-6.2) Exam
This exam is part of the preparation for the NSE 5 certification exam. The Fortinet Network Security Analyst title honors the ability to use Fortinet safety devices to incorporate network security monitoring and analytics. Four courses are offered by the Network Security Analyst program. For network and security professionals who need the skills to centrally monitor, evaluate, and report on Fortinet security devices, Fortinet recommends this program. For network and security professionals who need the skills to centrally monitor, evaluate, and report on Fortinet security devices, we recommend this course. You must pass a minimum of two Fortinet NSE 5 certification tests successfully:
- Fortinet NSE 5 - FortiSIEM
- Fortinet NSE 5 - FortiEDR (coming soon)
- Fortinet NSE 5 - FortiAnalyzer NSE5 FAZ-6.2 exam test
- Fortinet NSE 5 - FortiClient-EMS
- Fortinet NSE 5 - FortiManager
The basics of using FortiAnalyzer for centralized logging and reporting will be taught to learners. Students will learn how to configure and deploy FortiAnalyzer and by recording, review, and reporting, detect threats and attack patterns. Finally, some beneficial troubleshooting strategies will be tested by learners. Students can explore administration and management in interactive labs; register FortiAnalyzer log collection devices; use FortiAnalyzer to centrally collect logs; conduct a forensic log review based on simulated network attacks; generate reports; explore solutions to common problems of misconfiguration.
NEW QUESTION 19
Logs are being deleted from one of your ADOMs earlier that the configured setting for archiving in your data policy. What is the most likely problem?
- A. The ADOM disk quota is set too low based on log rates.
- B. Logs in that ADOM are being forwarded in real-time to another FortiAnalyzer device.
- C. CPU resources are too high.
- D. The total disk space is insufficient and you need to add other disk.
Answer: A
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-1/FMG FAZ/1100_Storage/0017_Deleted%20device%20logs.htm
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/87802/automatic-deletion
NEW QUESTION 20
What happens when a log file saved on FortiAnalyzer disks reaches the size specified in the device log settings?
- A. The log file is purged from the database.
- B. The log file rolls over and is archived.
- C. The log file is stored as a raw log and is available for analytic support.
- D. The log file is overwritten.
Answer: B
Explanation:
Reference:
81a4-00505692583a/FortiAnalyzer-6.0.5-Administration-Guide.pdf
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/355632/log-browse
NEW QUESTION 21
Which two statements about log forwarding are true? (Choose two.)
- A. You can use aggregation mode only with another FortiAnalyzer.
- B. The client retains a local copy of the logs after forwarding.
- C. Forwarded logs cannot be filtered to match specific criteria.
- D. Logs are forwarded in real-time only.
Answer: B,D
NEW QUESTION 22
How can you configure FortiAnalyzer to permit administrator logins from only specific locations?
- A. Use static routes
- B. Use trusted hosts
- C. Use administrative profiles
- D. Use secure protocols
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/186508/trusted-hosts
NEW QUESTION 23
If a hard disk fails on a FortiAnalyzer that supports software RAID, what should you do to bring the FortiAnalyzer back to functioning normally, without losing data?
- A. Shut down FortiAnalyzer and replace the disk
- B. Take no action if the RAID level supports a failed disk
- C. Hot swap the disk
- D. Replace the disk and rebuild the RAID manually
Answer: D
Explanation:
Explanation/Reference: https://www.fortinetguru.com/2020/06/raid-management-fortianalyzer-fortios-6-2-3-2/
NEW QUESTION 24
View the exhibit.
Why is the total quota less than the total system storage?
- A. The oftpd process has not archived the logs yet
- B. Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files
- C. The logfiled process is just estimating the total quota
- D. 3.6% of the system storage is already being used.
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/368682/disk-space-allocation
NEW QUESTION 25
How are logs forwarded when FortiAnalyzer is using aggregation mode?
- A. Logs are forwarded as they are received and content files are uploaded at a scheduled time.
- B. Logs and content files are stored and uploaded at a scheduled time.
- C. Logs and content files are forwarded as they are received.
- D. Logs are forwarded as they are received.
Answer: B
NEW QUESTION 26
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
- A. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
- B. FortiAnalyzer is functioning normally
- C. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
- D. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
Answer: C
Explanation:
Reference:
8977-00505692583a/FortiAnalyzer-5.6.10-Administration-Guide.pdf (40)
NEW QUESTION 27
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
- A. The disk quota for each device in the ADOM
- B. The disk quota for the ADOM type
- C. The disk quota for the FortiAnalyzer model
- D. The disk quota for all devices in the ADOM
Answer: D
NEW QUESTION 28
What FortiView tool can you use to automatically build a dataset and chart based on a filtered search result?
- A. Export to Report Chart
- B. Custom View
- C. Chart Builder
- D. Dataset Library
Answer: C
NEW QUESTION 29
View the exhibit.
What does the data point at 14:35 tell you?
- A. FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.
- B. The sqlplugind daemon is ahead in indexing by one log.
- C. FortiAnalyzer is dropping logs.
- D. FortiAnalyzer is indexing logs faster than logs are being received.
Answer: B
Explanation:
Explanation
Logs are received then they are indexed, no logging server in the world can index logs faster than they are received. When FAZ receives raw logs, they are inserted (indexed) by the SQL database and the sqlplugind daemon, this graph shows that FAZ received 3 logs and sqlplugind indexed 4.
NEW QUESTION 30
What is the main purpose of using an NTP server on FortiAnalyzer and all of its registered devices?
- A. Log collection
- B. Real-time forwarding
- C. Host name resolution
- D. Log correlation
Answer: A
NEW QUESTION 31
View the exhibit.
Why is the total quota less than the total system storage?
- A. The oftpd process has not archived the logs yet
- B. Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files
- C. The logfiled process is just estimating the total quota
- D. 3.6% of the system storage is already being used.
Answer: B
NEW QUESTION 32
If a hard disk fails on a FortiAnalyzer that supports software RAID, what should you do to bring the FortiAnalyzer back to functioning normally, without losing data?
- A. Replace the disk and rebuild the RAID manually
- B. Shut down FortiAnalyzer and replace the disk
- C. Take no action if the RAID level supports a failed disk
- D. Hot swap the disk
Answer: B
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD46446#:~:text=On%20FortiAnalyzer%2FFortiManager%20devices%20that,to%20exchanging%20the%20hard%20disk.
If a hard disk on a FortiAnalyzer unit fails, it must be replaced. On FortiAnalyzer devices that support hardware RAID, the hard disk can be replaced while the unit is still running - known as hot swapping. On FortiAnalyzer units with software RAID, the device must be shutdown prior to exchanging the hard disk
NEW QUESTION 33
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
- A. The disk quota for each device in the ADOM
- B. The disk quota for the ADOM type
- C. The disk quota for the FortiAnalyzer model
- D. The disk quota for all devices in the ADOM
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/743670/configuring-log-storage-policy
NEW QUESTION 34
When you perform a system backup, what does the backup configuration contain? (Choose two.)
- A. System information
- B. Authorized devices logs
- C. Generated reports
- D. Device list
Answer: A,D
NEW QUESTION 35
......
Use Valid New NSE5_FAZ-6.2 Test Notes & NSE5_FAZ-6.2 Valid Exam Guide: https://certkiller.passleader.top/Fortinet/NSE5_FAZ-6.2-exam-braindumps.html