PassLeader 300-610 Real Exam Question Answers Updated [Jun 23, 2026]
Easily To Pass New Cisco 300-610 Dumps with 330 Questions
Career Prospects
Passing the Cisco 300-610 exam is always a challenge, especially when the associated certification is on the line. Therefore, choose the training tool that suits you best and start mastering the Data Center Infrastructure field. This will help you complete the test with flying colors and also kickstart your professional development. This means that you can become a Data Center Technician, a Data Center Engineer, a Technical Marketing Engineer, or a Customer Delivery Consulting Engineer. With the CCNP Data Center certificate on your resume, your average annual salary can be about $79,760, according to the ZipRecruiter website.
NEW QUESTION # 181
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?
- A. A separate DSCP value must be configured for all FCIP VSAN traffic.
- B. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
- C. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
- D. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
Answer: B
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ ipsvc/nxos/ipsvc/cfcip.html
NEW QUESTION # 182
What should be implemented on a Cisco Nexus 9300 Series Switch to reduce oversubscription between switches within a Fibre Channel fabric?
- A. E-Trunk
- B. LACP port channel
- C. SAN port channel
- D. vPC+
Answer: C
Explanation:
A SAN port channel aggregates multiple physical Fibre Channel links into one logical interface, delivering higher aggregate bandwidth, even load-balancing, and redundancy across the links. By bundling E-ports or TE-ports into a SAN port channel on the Nexus 9300, you effectively reduce oversubscription between switches in the fabric.
NEW QUESTION # 183
An engineer must design a solution with storage reachability between too physical servers and a storage array. The storage array connectivity is to a SAN switch that Is limited to 46 ports. Which topology meets the requirements without adding more MOS switches?
- A. FCoE between the servers and the ToR switches that passes the Ffcee Channel traffic to the MDS switches
- B. VXLANs between the servers and the ToR switches that passes the FCoE traffic to the MDS switches
- C. ISCSI between the servers and the ToR switches that passes the FCoE traffic to the MDS switches
- D. FCIP between me servers and Lite ToR switches that passes the Fibre Channel traffic to the MOS switches
Answer: A
NEW QUESTION # 184
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
- A. Create interfaces in the VDC that can be accessed by another VDC.
- B. Create VRF-aware software infrastructure interfaces.
- C. Connect the VDCs to an external Layer 3 device.
- D. Cross-connect the ports between the VDCs.
- E. Create a policy map in the default VDC that routes traffic between the VDCs.
Answer: C,E
Explanation:
Section: Network Design
NEW QUESTION # 185
An engineer must logically partition two Cisco Nexus 7000 Series Switches into two environments called Test_39919596 and Production_59423879. The environments must use only F2-Series line cards and be limited to a maximum of 265 port-channels.
Which Cisco Nexus feature must be used?
- A. vFC
- B. VDC
- C. VRF
- D. vPC
Answer: C
NEW QUESTION # 186
Refer to the exhibit. An engineer deployed a VXLAN fabric with this configuration:
- interface VLAN 100 on VTEP1 with no IP address
- interface VLAN 200 on VTEP4 with no IP address
Which set of actions must the engineer take to ensure that host A communicates with host B?
- A. Associate VNI 10000 to VRF Web on VTEP4.
Associate VNI 10000 to VRF Application on VTEP1. - B. Associate VNI 20000 to VRF Application on VTEP1.
Associate VNI 20000 to VRF Web on VTEP1. - C. Associate VNI 20000 to VRF Web on VTEP1.
Associate VNI 10000 to VRF Application on VTEP1. - D. Associate VNI 10000 to VRF Application on VTEP4.
Associate VNI 20000 to VRF Web on VTEP1.
Answer: B
NEW QUESTION # 187
Refer to the exhibit. FCoE is used in the topology between the SAN Storage devices and SAN-Core routers. After noticing traffic drops to hosts accessing SAN-B storage, the engineering team wants to reduce the oversubscription ratio in the topology. Which action must the team take?
- A. Configure QoS to prioritize SAN-A traffic
- B. Increase the bandwidth between the SAN-Coro and SAN-Edgo devices.
- C. Increase the bandwidth between SAN-A and SAN-B Storage toward the SAN-Core devices.
- D. Configure QoS to prioritize SAN-B traffic.
Answer: B
NEW QUESTION # 188
A customer wants to deploy a Layer 2 extension over a transport infrastructure for multiple data centers. The data center technology should support a localized Layer 3 gateway, a separate flooding domain, and STP isolation per data center. Which DCI technology meets these requirements?
- A. VXLAN EVPN
- B. E-LAN
- C. Pseudowire
- D. E-Line
Answer: A
NEW QUESTION # 189
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 190
Refer to the exhibit.
Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch. The requirements are to redesign the storage network and keep these considerations in mind:
* The traffic from each of the server must be redundant and isolated.
* The design must tolerate hardware and software failures and upgrades of SAN fabric devices.
Which action must be taken to meet these requirements?
- A. Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
- B. Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
- C. Create a SAN port channel that faces the storage device to sustain a link failure.
- D. Place an additional Fibre Channel switch to create two physically independent storage fabrics.
Answer: D
NEW QUESTION # 191
A customer needs a design for a new data center network that meets these requirements:
- Logically partition the environment into separate security domains.
- Cut costs related to purchasing additional equipment.
- Separate routing processes, TCAM, QoS tables, and data planes.
Which technology must be used?
- A. VDC
- B. VRF
- C. vPC
- D. VLAN
Answer: B
Explanation:
VRF (Virtual Routing and Forwarding) is a technology that allows a single router to act as multiple virtual routers. Each VRF has its own routing table, TCAM, and QoS tables. This allows you to isolate different routing processes, traffic flows, and security domains on a single router.
VDC (Virtual Device Context) is a similar technology, but it is more granular. VDC allows you to create multiple virtual devices on a single physical router. Each VDC has its own operating system, configuration, and resources. This is useful for isolating different tenants or applications on a single router.
NEW QUESTION # 192
Refer to the exhibit.
A default route must be advertised into the VXLAN fabric for internet access. The engineer must use a static route because the edge firewall does not support any dynamic routing protocol. Which two features must the engineer use to allow learning and withdrawing of the default route without any manual intervention?
(Choose two)
- A. HMM tracking
- B. Network Address Translation
- C. anycast gateway
- D. IP forwarding
- E. policy-based routing
Answer: C,E
NEW QUESTION # 193
A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned. Which two policies be modified to support this design? (Choose two.)
- A. Network Control Policy
- B. vNIC Policy
- C. vNIC Template Policy
- D. Ethernet Adapter
- E. Pin Group Policy
Answer: A,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Network-Mgmt/4-0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_01010.html
https://jeremywaldrop.wordpress.com/2010/05/03/how-to-enable-cdp-on-cisco-ucs-vnics/
NEW QUESTION # 194
What is a design consideration when implementing FSPF?
- A. FSPF runs on a per-chassis basis.
- B. Routes are based on the domain ID.
- C. FSPF runs only on F Ports.
- D. Routes are based on the distance vector protocol.
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ fabric/nxos/cli_fabric/fspf.html
NEW QUESTION # 195
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 196
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?
- A. distance limitations
- B. reduction in application performance
- C. potential data loss
- D. specific backup requirements
Answer: C
NEW QUESTION # 197
Refer to the exhibit.
A company must implement a multitenant environment for DEV and PROD application teams. The design must support end-to-end route isolation for remote external sites, overlapping IP ranges, and fast, transparent application deployment. Which solution meets the objectives?
- A. Implement unique VLANs for DEV and PROD.
- B. Configure independent routing protocols for DEV and PROD.
- C. Implement dedicated ACLs between DEV and PROD.
- D. Configure separate VRFs for DEV and PROD.
Answer: D
NEW QUESTION # 198
......
Latest 300-610 Study Guides 2026 - With Test Engine PDF: https://certkiller.passleader.top/Cisco/300-610-exam-braindumps.html