Positive Aspects of Valid Dumps 300-430 Exam Dumps! [Mar-2025]
First Attempt Guaranteed Success in 300-430 Exam 2025
Cisco 300-430 exam covers a range of topics that are essential for implementing wireless networks in an enterprise environment. These topics include wireless site surveys, implementing and configuring wireless infrastructure, implementing advanced capabilities, and troubleshooting wireless networks. 300-430 exam also covers the latest Cisco technologies, including Cisco DNA Center, Cisco Identity Services Engine (ISE), and Cisco Prime Infrastructure. Passing 300-430 exam validates your knowledge and skills in implementing wireless networks using Cisco technologies, making you a valuable asset to any organization looking to deploy and manage wireless networks.
The implementation of wireless networks in an enterprise environment requires a deep understanding of wireless technologies, networking concepts, security protocols, and best practices. The Cisco 300-430 exam covers a wide range of topics, including wireless site surveys, wireless LAN architecture, RF design, WLAN security, network services, and device hardening. Candidates who pass 300-430 exam will demonstrate their proficiency in implementing and maintaining reliable, secure, and scalable wireless networks.
NEW QUESTION # 20
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?
- A. Change the AVC application WebEx-app-sharing to mark
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/AVC_dg7point5.html - B. Create an AVC profile for WebEx
- C. Create an ACL for WebEx
- D. Change the WLAN reserved bandwidth for WebEx
Answer: B
NEW QUESTION # 21
When using a Cisco Catalyst 9800 Series Wireless Controller, which statement about AutoQoS is true?
- A. It matches traffic and assigns each matched packet to QoS groups
- B. It allows the output policy map to put specific QoS queues into specific subgroups
- C. It has a set of predefined profiles that you cannot modify further
- D. It automates deployment of wired QoS and makes wireless QoS implementation easier
Answer: A
Explanation:
Auto-QoS matches traffic and assigns each matched packet to qos-groups.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-2/config- guide/b_wl_17_2_cg/wireless_auto_qos.html
NEW QUESTION # 22
A corporation has recently implemented a BYOD policy at their HQ.
Which two risks should the security director be concerned about? (Choose two.)
- A. network analyzers
- B. keyloggers
- C. malware
- D. unauthorized users
- E. lost and stolen devices
Answer: C,E
Explanation:
https://ccbtechnology.com/byod-5-biggest-security-risks/
https://blogs.cisco.com/security/byod-many-call-it-bring-your-own-malware-byom
NEW QUESTION # 23
A network administrator just completed the basic implementation of Cisco CMX and tries to implement location tracking. The administrator is having trouble establishing connectivity between one of the WLCs through NMSP. What must be configured to establish this connectivity? (Choose two.)
- A. Reboot Cisco CMX after adding the WLC for the first time.
- B. Add permanent licenses on the Cisco CMX server.
- C. Add to the WLC the MAC address and SSC key for the Cisco CMX server.
- D. Enable NMSP on the WLC.
- E. Allow on the firewall port 16113 between Cisco CMX and the WLC.
Answer: D,E
NEW QUESTION # 24
Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?
- A. Wireless Intrusion Prevention System
- B. Cisco Mobility Services Engine
- C. Cisco Connected Mobile Experiences
- D. Cisco Hyperlocation Module
Answer: C
Explanation:
NEW QUESTION # 25
An engineer has configured the wireless controller to authenticate clients on the employee SSID against Microsoft Active Directory using PEAP authentication.
Which protocol does the controller use to communicate with the authentication server?
- A. RADIUS
- B. EAP
- C. WPA2
- D. 802.1X
Answer: A
NEW QUESTION # 26
A customer is deploying local web authentication. Which software application must be implemented on Cisco ISE to utilize as a directory service?
- A. Novell eDirectory
- B. SAML
- C. Solaris Directory Service
- D. LDAP
Answer: D
Explanation:
NEW QUESTION # 27
A network is set up to support wired and wireless clients. Both types must authenticate using 802.1X before connecting to the network. Different types of client authentication must be separated on a Cisco ISE deployment. Which two configuration items achieve this task? (Choose two.)
- A. policy results
- B. device profiles
- C. policy groups
- D. separate networks
- E. policy sets
Answer: C,E
NEW QUESTION # 28
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?
- A. 3 hours
- B. 7 days
- C. 3 days
- D. 24 hours
Answer: B
Explanation:
NEW QUESTION # 29
Which QoS level is recommended for guest services?
- A. silver
- B. platinum
- C. bronze
- D. gold
Answer: C
Explanation:
NEW QUESTION # 30
An engineer configured a Cisco AireOS controller with two TACACS+ servers.
The engineer notices that when the primary TACACS+ server fails, the WLC starts using the secondary server as expected, but the WLC does not use the primary server again until the secondary server fails or the controller is rebooted.
Which cause of this issue is true?
- A. Fallback is disabled
- B. Fallback is enabled
- C. DNS query is enabled
- D. DNS query is disabled
Answer: A
NEW QUESTION # 31
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?
- A. split tunneling
- B. FlexConnect
- C. SE-connect
- D. AP failover priority
Answer: A
Explanation:
NEW QUESTION # 32
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?
- A. FlexConnect mode with local authentication
- B. FlexConnect mode with OfficeExtend enabled
- C. FlexConnect mode with central authentication
- D. FlexConned mode with central switching enabled
Answer: B
Explanation:
A Cisco OfficeExtend access point (Cisco OEAP) provides secure communications from a Cisco WLC to a Cisco AP at a remote location, seamlessly extending the corporate WLAN over the Internet to an employee's residence. The user's experience at the home office is exactly the same as it would be at the corporate office. Datagram Transport Layer Security (DTLS) encryption between the access point and the controller ensures that all communications have the highest level of security.Cisco OEAPs are designed to work behind a router or other gateway device that is using network address translation (NAT). NAT allows a device, such as a router, to act as an agent between the Internet (public) and a personal network (private), enabling an entire group of computers to be represented by a single IP address. There is no limit to the number of Cisco OEAPs that you can deploy behind a NAT device.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp1241304
NEW QUESTION # 33
An engineer is in the process of implementing Fastlane on a wireless network with a Mobility Express AP installed. The network must support voice and video applications for Apple devices. Due to a security concern, all iPhones are updated to version 14.5.432302546. Which QoS profile must the engineer configure on the user WLAN?
- A. Bronze
- B. Best Effort
- C. Platinum
- D. Silver
Answer: B
NEW QUESTION # 34
An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP. Which client feature becomes available only if this configuration is changed?
- A. mDNS
- B. static IP
- C. fast roaming
- D. multicast
Answer: B
NEW QUESTION # 35
A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers. Which address provides automatic discovery of the best RP for each multicast group?
- A. 224.0.1.40
- B. 224.0.0.13
- C. 224.0.1.39
- D. 224.0.0.14
Answer: A,C
NEW QUESTION # 36
Refer to the exhibit.
An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
- A. Configure the access point with the root certificate from ISE.
- B. Configure a policy on ISE to allow devices to connect that validate the certificate.
- C. Configure the certificate, WLAN, and radio interface on WGB.
- D. Configure WGB as a network device in ISE.
- E. Configure the certificate on the WLC.
- F. Configure WLAN to authenticate using ISE.
Answer: B,C,F
Explanation:
https://mrncciew.com/2018/05/25/wgb-with-peap/
NEW QUESTION # 37
......
Cisco 300-430: Target Audience + Prerequisites
The candidates allowed to sit for the 300-430 test are those who want to work in networking with enhanced skills in wireless networks. They have the right experience, which is 3 to 5 years in providing networking solutions for the enterprise.
Before taking Cisco 300-430, you need to complete the core test for the CCNP Enterprise certificate, which is Cisco 350-401. You also must have a firm comprehension of the exam topics whose focus is on executing wireless networks. If you want, you can also obtain the CCNA certification beforehand to have the basic idea of the associate-level option. This is not a strict requirement, so it is up to you to choose.
Practice LATEST 300-430 Exam Updated 281 Questions: https://certkiller.passleader.top/Cisco/300-430-exam-braindumps.html